Health & Safety

High alcohol antibacterial formula in a handy carry bottle, perfect for keeping hands, fingers and wrists free from bacteria and germs. Works right away without the need for water or soap.

Active Substances: Ethanol 80% (v/v), Glycerol 1.45% (v/v), Hydrogen peroxide 0.125% (v/v).

Usage: Apply directly to the palm of the hand. Cover the entire surface of both hands and rub until dry.

IMPORTANT: For external use only. Avoid contact with eyes - in case of contact, rinse immediately with water for two minutes and contact your doctor.

Wall mountable steel clasp for PEHS80 Penn Elcom Hand Sanitizer bottles.

Screw pack included.

New from Penn Elcom, CROSS 3 is here to revolutionise cable crossovers and redefine the industry standard. Forged from high-quality thermoplastic polyurethane (TPU), CROSS 3 is a three-channel crossover that gives you unrivalled strength, abrasion resistance and flexibility, with NEW fire retardant technology. CROSS 3’s superior performance makes it the clear choice for any working environment, whether indoor or outdoor.

KEY FEATURES:
• Load Capacity = Up to 5 Tonnes / 5.51 US Tons
• Fire retardant (DIN EN 13501-1).
• Standard dimension of 110cm - 10% longer than standard cable crossovers!
• Coloured lids can be changed.
• Fixed lid in drive-over position.
• Quick and easy assembly.
• MAX PERFORMANCE: anti-sliding pads available for the hexagonal base.

DIMENSIONS:
• Length:1.1m / 43"
• Width: 290mm / 11.42"
• Height: 55mm / 2.17"
• Channel width: 3 x 32mm / 1.26"

CROSS 5 is more than just a crossover. Forged from high quality thermoplastic polyurethane (TPU), CROSS 5 is a five channel crossover system that gives you unrivalled strength, abrasion resistance and flexibility, with NEW fire retardant technology.
Its ingenious design enables a wide variety of crossover combinations, whatever your cable management needs. The two elements that enable this system are the base section and the ramp section.

BASE SECTION: The base sections acts as a connector piece, from which many combinations of cross over systems can be created.

RAMP SECTION: The ramp section has a 15° angle of inclination, the optimal angle for vehicles to drive over.

KEY FEATURES:
• Highly tear-proof and high form stability.
• Indented channel ridges to prevent the lid bowing under pressure.
• Resistant to most oils, fats and chemicals.
• Fire retardant (DIN EN 13501-1).
• Can withstand 5 tonnes of direct pressure.
• Coloured lids can be changed.
• Fixed lid in drive over position.
• Quick and easy assembly.
• MAX PERFORMANCE: anti-sliding pads available for hexagonal base.

DIMENSIONS:
Base Section
• Length: 1m / 39"
• Width: 370mm / 14.57"
• Width of x2 base pieces side by side: 800mm / 31.5"
• Height: 58mm / 2.28"
• Weight: 12kg/26.46lb
• Cable channels: width 40mm / 1.57", height 44mm / 1.73"

Ramp Section
• Length: 1m / 39"
• Width: 230mm / 9.06"
• Height: 50mm / 1.97"
• Weight: 5kg/11.02lb
• Incline angle: 15°

Wheelchair Section
• Length: 1m / 39"
• Width: 1.2m / 47"
• Height: 62mm / 2.44"
• Incline angle: 3.4° / 6%