PDU10-PCFCV - 10A Power Dish (Vertical) NEW!

Full Page View

10A Vertical Power Dish for Flight Case Built to specifically fit into flight cases, the 10A Flight Case Power Dish (Vertical) was created for those who require power for additional equipment and access to electricity. The power dish can be used for: - Power distribution for mobile workstations including screen monitors and laptops - Charging battery equipment - Powering up-lighters, LED lighting or other external staging equipment within and outside the case Created to be used in: - Backstage settings - Outdoor settings - Mobile set-ups - Pop-ups and exhibitions The power dishes are easily mounted into any style of flight case, using the same technique as fitting a case handle or dish. There are horizontal (FCH) or vertical (FCV) mounting versions available. The low profile dish gives you the option once fitted, via a PowerCon connector on the front of the dish/case delivering mains power in and through a 10amp thermal breaker to a side loaded IEC chassis socket out situated on the rear of the dish and once fitted situated on the inside of the case. Technical Specifications - PowerCon Input NAC3MPXXA - 10A Thermal Breaker Switch - 10amp IEC Output - Dish Dimensions (OD): 178mm x 127mm x 68mm / 7.01" x 5" x 2.68" - Hole Cutout Dimensions: 148mm x 96mm / 5.83" x 3.78" - Available in two versions: Horizontal & Vertical

PDU10-PCFCH - 10A Power Dish (Horizontal) NEW!

Full Page View

10A Horizontal Power Dish for Flight Case Built to specifically fit into flight cases, the 10A Flight Case Power Dish (Horizontal) was created for those who require power for additional equipment and access to electricity. The power dish can be used for: - Power distribution for mobile workstations including screen monitors and laptops - Charging battery equipment - Powering up-lighters, LED lighting or other external staging equipment within and outside the case Created to be used in: - Backstage settings - Outdoor settings - Mobile set-ups - Pop-ups and exhibitions The power dishes are easily mounted into any style of flight case, using the same technique as fitting a case handle or dish. There are horizontal (FCH) or vertical (FCV) mounting versions available. The low profile dish gives you the option once fitted, via a PowerCon connector on the front of the dish/case delivering mains power in and through a 10amp thermal breaker to a side loaded IEC chassis socket out situated on the rear of the dish and once fitted situated on the inside of the case. Technical Specifications - PowerCon Input NAC3MPXXA - 10A Thermal Breaker Switch - 10amp IEC Output - Dish Dimensions (OD): 178mm x 127mm x 68mm / 7.01" x 5" x 2.68" - Hole Cutout Dimensions: 148mm x 96mm / 5.83" x 3.78" - Available in two versions: Horizontal & Vertical

RADM-23CW-PC - PowerCon Power Input NEW!

Full Page View

Multicoloured & White PowerCON Rack Light RADM-23CW-PC is for use with any 19-Inch equipment racks. Able to suit any 19-Inch unit, it allows users access to controls or necessary equipment stored in racking units situated in dimly lit environments or to add the necessary atmosphere. Multi-functional with no moving parts, the rack light can be fitted at the front or back of the rack with lightweight LED strips. This product comes with a PowerCon connector, allowing the user more control over power input and keeping your rack connections clearer and tidier. With over 19 dynamics modes available with speed variability, you can select LED output from the front switch between RGB (with up to 20 various colours to choose from) or White only, offering great light intensity and distribution. Colour and Pattern programming comes preinstalled, with three push buttons on the top of the case allowing you ultimate control and memory saving for the last mode used. Technical Specifications - 15 x White LED - 15 x RGB LED - Beam Angle (deg) 120 - IP Rating 65 (moisture resistant) - LED Type SMD5050 - Dimensions (OD) 44mm x 483mm x 70mm / 1.73" x 19.02" x 2.76" Material: 1mm / 1/32" Steel

PDU16-5DJ-AV - 5 Channel Switched PDU NEW!

Full Page View

1U 16A 5 Channel Switched Power Distribution Unit This model in the PDU16 series is a 1U distributor with five switchable channels protected by an overload trip switch. Each numbered channel has a dedicated rocker switch with neon indicator light for quick and easy identification. The unit receives power through a C20 inlet and can output to five C13 / IEC outlets. Each unit comes supplied with one 1.8m power cable (choice of country type available)

P2598 NEW!

Full Page View

Hinge with Lid Stay in 7mm / 1/4" Shallow Dish with 30mm / 1.18" Offset. From Split to Hole Centre: 10mm / 3/8"

Part No.	Finish	Description	Weight
P2598Z	PennBrite™	Hinge with Lid Stay in Shallow Dish with Offset	0.21kg/0.45lb

R2SP82G2 Slimline 4-Way Speaker Splitter Box WITH Feed Thru NEW!

Full Page View

Slimline 4-Way Speaker Splitter Box with NL8 In/Out Feed Thru This slim profile drop box is made to link multiple boxes and speakers, running up to two NL8 cables from your amplifier rack to your speaker stack. Made with high-grade steel, the R2SP822G is made to allow for more complex arrangements and flexibility. Able to be used for short link leads between boxes and speakers, its offers improved cable management and less rigging and derigging time. Can be used as a single box per stack or multiple boxes chained for larger stacks or custom wired for many pin or pin swap options. Input: 1x NLT8MPXX-BAG Output: ( Feed thru ) 1x NLT8MPXX-BAG Output: 4x NL4MPXX NLT8MPXX – NL4MPXX Pin Connections + 1- 1, 2, 3 & 4 wired to each NL4 on pins +1-1

Part No.	Description
R2SP82G2	Slimline 4-Way Speaker Splitter Box WITH Feed Thru

2351-85PB NEW!

Full Page View

Surface Mount Spring-Loaded Handle. Short Formed Bail.

Special Order to Ship Outside of USA

D053510CMZ NEW!

Full Page View

Rubber Cable Feedthrough Dish 160mm x 160mm / 6.3" x 6.3" You can pass cabling that is stored inside the case coiled or on a spool through the rubber moulded flaps to hold it in place and prevent it from retreating back inside the case. With this dish, there’s no longer a need to take the cabling out or open the lid to unwind. Simply make the incisions you need along the pre-scored indentations to create one or several openings. Can be used as a single dish or as opposing pairs to create a larger space that can be reached into.

Part No.	Finish	Description
D053510CMZ	Zinc	Recessed Rubber Cable Feedthrough Dish

L0340 NEW!

Full Page View

Adjustable Pull-Action Latch Clamp for quick closure of crates, enclosures, cases, rack covers and lids. - Thumb-control lever for single-handed operation. - Threaded hook for easy adjustment. - Catch plate included.

W9006 - W9007 NEW!

Full Page View

Low-Cost 100mm / 4" Swivel Castors with Blue Wheel Carrying Weight per Wheel: 150kg / 330lb

Part No.	Description	Weight
W9006	Low-Cost Swivel Castor with 100mm / 4" Blue Wheel	0.81kg/1.78lb
W9007	Low-Cost Braked Swivel Castor with 100mm / 4" Blue Wheel	0.95kg/2.1lb

3016 - For 6mm / 1/4” Panels NEW!

Full Page View

1/4" Tongue Extrusion mates with 3017 Groove Extrusion. Board thickness: 7mm / 1/4" Fits Most Domestic Laminates.

Special Order to Ship Outside of USA

3017 - For 6mm / 1/4” Panels NEW!

Full Page View

1/4" Groove Extrusion mates with 3016 Tongue Extrusion. Board thickness: 7mm / 1/4" Fits Most Domestic Laminates.

Special Order to Ship Outside of USA

CROSS5-W-RAMP - Wheelchair Ramp for Cable Crossovers NEW!

Full Page View

Wheelchair Ramp for Cross 2 and Cross 5 Cable Crossovers. Simply add on top of the standard Cross 5 ramps to make them Wheelchair accessible.

3270 - For 12mm / 1/2” Panels NEW!

Full Page View

U-Channel Board thickness: 13.7mm / 9/16" TO BE USED WITH LAMINATED PLYWOOD Material: Aluminium 6063-T5

Special Order to Ship Outside of USA

Dustproof Gaskets

Full Page View

Dustproof Gaskets

L9075/928SMOL3-PBZ NEW!

Full Page View

Medium SMOL®3 Latch with Padlock Bracket in Dish with Offset on the Bottom half Only - Automatic Open/Close System - Low Profile / Flat Cam Technology - Latch Retainer Safety Feature - Padlock Bracket Suits L0906 Backplate (Padlock not included, for demonstration purposes only)

Part No.	Finish	Description	Dish Depth	Offset	Lockable	Weight
L9075/928SMOL3-PBZ	14mm / 1/2	Offset Dish	14mm / 1/2"	Bottom 27mm / 1 1/16"	Padlockable	0.21kg/0.47lb

FLight Panel™ 2 NEW!

Full Page View

The lightest, strongest, and most economical panel in the market. A perfect and environmentally friendly alternative to ABS and PVC laminates on wood at an affordable price. It has an outstanding compression and impact strength, making it perfect for Cases. - Haircell / Pinseal pattern on both sides - 100% recyclable: Environmentally friendly - Lightest panel to date - Low cost - Compatible with most printing processes Panel Size: 2.44m x 1.22m / 96" x 48" Download Datasheet

Part No.	Finish	Thickness	Description	Weight
M885010 M885010BK/BL M885010BK/GY	Black Black/Blue Black/Grey	10mm / 3/8"	Lightweight Panel Black on Both Sides Lightweight Panel 1 Side Black / 1 Side Blue Lightweight Panel 1 Side Black / 1 Side Grey	7.44kg/16.4lb
M885012 M885012BK/BL M885012BK/GY	Black Black/Blue Black/Grey	12mm / 1/2"	Lightweight Panel Black on Both Sides Lightweight Panel 1 Side Black / 1 Side Blue Lightweight Panel 1 Side Black / 1 Side Grey	8.93kg/19.69lb
M885013 M885013BK/BL M885013BK/GY	Black Black/Blue Black/Grey	13mm / 1/2"	Lightweight Panel Black on Both Sides Lightweight Panel 1 Side Black / 1 Side Blue Lightweight Panel 1 Side Black / 1 Side Grey	10.4kg/22.93lb

COVER-SPCC Wooden Crate Ventilation Cover NEW!

Full Page View

TSA Wooden Crate Ventilation Cover for K9 Screening As per TSA wooden crate of equipment must have Ventilation Staring July 1st, 2021, airlines had started the 100% screening for all cargo. To make things faster and avoid having to X-Ray every cargo, they use K9 units (dogs). The airlines now ask for wood crate builders to add ventilation to their crates to make the work of K9 faster and avoid the need for X-Rays. This Wooden Crate Ventilation Cover will help your crate go faster in transit and avoid shipping delays. Material: Steel

Part No.	Description	Weight
COVER-SPCC 3D CAD	Wooden Crate Ventilation Cover	54g/0.12lb

CROSS 2 NEW!

Full Page View

CROSS 2 is more than just a crossover. Forged from high-quality thermoplastic polyurethane (TPU), CROSS 2 is a two-channel crossover system that gives you unrivaled strength, abrasion resistance, and flexibility, with NEW fire retardant technology. Its ingenious design enables a wide variety of crossover combinations, whatever your cable management needs. The two elements that enable this system are the base section and the ramp section. BASE SECTION: The base sections acts as a connector piece, from which many combinations of cross-over systems can be created. RAMP SECTION: The ramp section has a 15° angle of inclination, the optimal angle for vehicles to drive over. Use CROSS5-RAMP and CROSS5-RAMP-500 ramps. KEY FEATURES: • Highly tear-proof and high form stability. • Indented channel ridges to prevent the lid from bowing under pressure. • Resistant to most oils, fats, and chemicals. • Fire retardant (DIN EN 13501-1). • Can withstand 5 tonnes of direct pressure. • Coloured lids can be changed. • Fixed lid in drive-over position. • Quick and easy assembly. • MAX PERFORMANCE: anti-sliding pads available for hexagonal base. DIMENSIONS: Base Section • Length: 1m / 39" • Width: 205mm / 8.07" • Width of x2 base pieces side by side: 410mm / 16.14" • Height: 57mm / 2.24" • Weight: Coming Soon • Cable channels: width 40mm / 1.57", height 43mm / 1.69"

Ramp Sections

Part No.	Finish	Description	Weight
CROSS5-RAMP	Black	1m / 39" Ramp Section for Cross 2 and Cross 5	5kg/11.02lb
CROSS5-RAMP-500	Black	500mm / 19.69" Ramp Section for Cross 2 and Cross 5	2.5kg/5.51lb

R1194/2UK-400 NEW!

Full Page View

2U Vented Rack Shelf 400mm / 15.74" Deep - With Stolts for Ventilation and Strapping Equipment - With Back Slots for Rear Support - With New Quick Removal Mounting System Material: 1.5mm / 1/16" Steel

Part No.	Finish	Description	Weight
R1194/2UK-400	Black	2U Rack Vented Shelf 400mm / 15.74" Deep	2.34kg/5.16lb

W0950-WP - Castor Plate For W0950 NEW!

Full Page View

Castor Plate For W0950 Castor with Integrated Adjuster Foot For easy installation and removal of the castor/feet

Part No.	Finish	Description	Weight
W0950-WP	Black	Plate For W0950 Castor with Integrated Adjuster Foot	0.12kg/0.26lb

RADM-23CW - Universal PSU NEW!

Full Page View

1U LED Multicolour + White Rack Light for use in 19 inch equipment racks and can be fitted at the front or back of the rack. Colour and Pattern programming is via push buttons on the top of the case. - 15 x RGB LED - 15 x White LED - Beam Angle 120 degrees - IP Rating 65 (moisture resistant) - LED Type SMD5050 - 12V DC Operation - 300mA - 500mA universal PSU supplied Data Sheet Material: 1mm / 1/32" Steel

Part No.	Finish	Description	Weight
RADM-23CW 3D CAD	Black	1U LED Multicolour + White Rack Light	0.7kg/1.54lb

F1020 - Metal Pallet Foot NEW!

Full Page View

Metal pallet foot allows cases and crates to be lifted and transported safely using forklifts. Recommended Load Capacity: 100kg / 220lb per foot (Sold individually) Material: 2mm / 0.08" Steel

Part No.	Finish	Description	Weight
F1020	Black	Metal Pallet Foot	1.11kg/2.46lb

R1285-CMP

Full Page View

1U Panel with 5 Steel Rings for Cable Management Material: 2mm Steel

4838 NEW!

Full Page View

Large Latch in Surface Mount Dish with Protective Ridges Height: 15mm / 9/16" Material: 1.5mm / 1/16" Steel

R1498 SERVERS / COMPUTERS - Shelves with Custom Faceplates

Full Page View

Vented Rack Shelf with CNC cut Magnetic Faceplates for a variety of Servers and Computers. Custom Front Panels available for any piece of equipment on the market such as AV equipment or game consoles. Each Kit includes: - 1 x Vented Rack Shelf with Magnets for Faceplates - 1 x CNC cut Faceplates - 1 x Clamp Bar to help secure your equipment *IT Equipment NOT included

APPLE

Part No.	Application		Weight
R1498/2UK-MACMINI13	1 X MAC MINI	2U	3.5kg/7.72lb
R1498/3UK-MACSTUDIO	1 X MAC STUDIO NEW!	3U	3.6kg/7.94lb

DELL

WATCHGUARD FIREBOX

R1498 DVD PLAYERS - Shelves with Custom Faceplates

Full Page View

Vented Rack Shelf with CNC cut Magnetic Faceplates for a variety of DVD Players. Custom Front Panels available for any piece of equipment on the market such as AV equipment or game consoles. Each Kit includes: - 1 x Vented Rack Shelf with Magnets for Faceplates - 1 x CNC cut Faceplates - 1 x Clamp Bar to help secure your equipment *DVD Player NOT included Material: 2mm / 0.08" Steel

R4008 800mm / 32" Wide, Metric Threaded Rack Tower

Full Page View

800mm / 31.5" Wide Rack Tower, with M6 Threaded Rail. With Lockable Shatterproof Polycarbonate Front Door & Lockable Plain back Door. Available Depths: 800mm / 31.5" and 1m / 39" Available Heights: From 22U to 47U Available Front Doors: Shatterproof Polycarbonate, Plain Steel or Vented Steel Features - Simple assembly - Doors & Sides can be removed for full access - Adjustable Threaded Rack Rails - Integral cable trays - Earth Points and Gangable - Can be built as open, sides only or closed tower versions - 4 x W0950 Castor/Foot Included Custom Sizes & Colours Available. For 800mm / 32" deep enclosures, use rack shelf support R8840-22 For 1000mm / 40" deep enclosures, use rack shelf support R8840-30 Spec Sheet Presentation Material: Steel

800mm x 800mm / 32" x 32" - Glass Door

800mm x 800mm / 32" x 32" - Vented Door

800mm x 1000mm / 32" x 40" - Glass Door

800mm x 1000mm / 32" x 40" - Vented Door

Doors & Accessories

Part No.	Finish	Description		Weight
R4008-BGD-xxUK	Black	Glass Door, Replace xx with U size
R4008-VFD-xxUK	Black	Perforated Steel Door, Replace xx with U size
R4008-PFD-xxUK	Black	Plain Steel Door, Replace xx with U size
R8295		Set of 4 Adjuster Feet with M12 thread. Adds from 30mm / 1.18" (min) to 95mm / 3.74" (max)		50g/0.11lb

PR3636B NEW!

Full Page View

Amphenol 1/4” (6.35mm) Right Angle Mono Jack plug connector to 1/4” (6.35mm) Right Angle Mono Jack plug connector Connectors: ACPM-T 1/4” (6.35mm) Right Angle Mono Jack plug connector Musician Series II Connectors Colour: Satin Cable Colour: Black

Special Order Outside of South America

PBXWPB - Parcel Box Delivery Placard NEW!

Full Page View

A high-quality steel placard for indicating deliveries should be left in a nearby PBX Penn Parcel Box. Very useful for placing at a driveway or entrance regularly visited by delivery drivers to direct them to a PBX postbox that might not be immediately visible. The eye-catching, weather-resistant powder coat is an attractive finish and the placard comes with pre-drilled holes to allow for easy wall mounting. Height = 210mm / 8.27" Weight = 140mm / 5.51" Depth = 1.2mm / 0.047" Material: 1.2mm / 0.05" Steel

Part No.	Finish	Description	Weight
PBXWPB	Black	Parcel Box Delivery Placard	0.2kg/0.44lb